Submersible Pump HCP 80AFU21.5L

Submersible Pump HCP 80AFU21.5L use for :

  • Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant.
  • Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory. Sewage management, accumulated water, septic tank stock farm
  • Pumping sewage from hotels, restaurants schools and public buildings
  • Sewage management, accumulated water, septic tank, stock farm.

FEATURES Of Submersible Pump HCP 80AFU21.5L :

  • International standard design : Epoxy Resin Sealed Cable, Auto Cut (MTS : Miniature Thermal Sensor Equip to >15HP model), dry motor, silicon carbide mechanical seal, high grade cast iron offering highest quality and performance.
  • P/U/C/E multiple impellers designed to handle sewage solids and/or fibrous substances
  • Double Mechanical Seal : Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.
  • Mechanical seal bracket designed with Oil Elevating Chip to enhance the lubricant, and extend the lifetime of the Mechanical Seal
  • Full range offering low to high head and flow capabilities, with compact and easy installation. Also, available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit.
  • AFC pump is designed with 6 lobes input, equipped with double tungsten blade; with can strongly cut off the foreign materials and avoid  the impeller clog.


Model AF
Discharge (mm)  50 • 80 • 100
Limits of Use Liquid Temp. 0 ~ 40°C (32 ~ 104°F)
Applications Wastewater
Submersion Depth 30m (100 feet)
Type Frequency 50 Hz
Motor 2 P (3000 RPM) • 4 P (1500 RPM) •Dry Motor
Insulation Class B (0.5~3HP) • Class F (5~10HP)
Protection IP68
Protector Auto-Cut
Bearing Ball Type
M. seal Double M. Seal
Impeller Semi-open (P/U)Enclosed-channel (E)
Material Upper Cover FC-200
Motor Frame FC-200
Shaft End SUS410 (2P : 0.5~1HP)SUS403 (2P:2~10HP • 4P:0.5-5HP)SUS420J2 (4P:7.5 ~10 HP)
M. seal Upper : Carbon/Ceramic Lower : Silicon/silicon
Casing FC-200
Impeller FC-200
Cable VCT or H07RN-F or SJOW/SOW


Model : 80AFU21.5L

HP (kW) : 2 (1.5)

Discharge Inch (mm) : 3″ (80)

Phase : 1 and 3

Start Method : Capacitor and Direct

Head : 7 m

Capacity : 0.5 m³/min

Capacity : 30 m³/h

Solid Passage : 76 mm

Weight 1 ø : 38 kg

Weight 3 ø : 34  kg

Submersible Pump HCP 80AFU21.5L

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *



Copy Protected by Chetan's WP-Copyprotect.