Submersible Pump HCP AFG55

Submersible Pump HCP AFG55 use for Sand and gravel, coal plants, construction sites, Sludge, Silt removal.


  • Offering the highest in quality and performance with a international standard design.
  • Harden and abrasion resistant impeller with a 30 – 33 HRC Hardness. Abrasion resistant chrome steel wear ring equipped for model AF-610/615.
  • Equipped with harden ductile iron agitator with a hardness of 50-55 HRC to create a powerful stirring action to remove fine solids.

APPLICATION Of Submersible Pump HCP AFG55 :

  • Sand and gravel, coal plants, construction sites.
  • Sludge, Silt removal.
  • Agitates larger solids from the sump floor.



Model : AFG-55

Output HP (kW) : 7 1/2 ( 5.5 )

Discharge Inch (mm) : 4″ ( 100 )

Pole: 4

Phase : 3

Start Method : Direct

Standard: 15 M

1 m³/min

Weight: 149 kg

Solid Passage : 26 mm

Width: 687 mm

Length: 405 mm

Height: 795 mm



Limits Of Use Liquid Temp. 0 – 40  0C
Applications Dewatering Fluid Contains Solid Sediment
Submersion Depth 30m
Type Frequency 50Hz   . 60Hz
Motor 4P   .  Dry Motor
Insulation Class F
Protection IP68
Protector Auto-cut  ( AFG-615 : MTS )
Bearing Ball Type
M. seal Double M. Seal
Impeller Enclosed-channel
Material Upper Cover FC-200
Motor Frame FC-200
Main Shaft SUS420J2
Impeller FC-200 + Heat Treatment
M seal Upper : Carbon/Ceramic
 lower : Silicon/Silicon
Casing FC-200
Agitator FCD-700 + Heat Treatment
Wear Ring AFG-610/615 : FC-200
Casing Cover AFG-55/75 : FC-200 + Heat Treatment
  AFG-610/615 : FC-200
Cable VCT or H07RN-F or SOW
( 10HP/230V:SJOW)
Optional Pump can be customized to fit specifications
Submersible Pump HCP AFG55

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *



Copy Protected by Chetan's WP-Copyprotect.