Tokico Flow Meter 1.5 Inch


Tokico Flow Meter 1.5 Inch FRO043802X   are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.

FRO Type

This flowmeter is widely used for transaction and in other applications is which a Roots type flowmeter is most suitable.

The Roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, its accuracy remain virtually unchanged over a long period of time.

 

Features :

  • Wide flow range and high accuracy

The accuracy of these flowmeters is within ±0.5% over a wide range of flow rates (max range of 1 : 150 for heavy oil)

  • Small pressure loss

Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.

  • Compact Design

A positive displacement type flowmeter can be used at relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read, and construction is simple.

  • Excellent durability

The simple construction of these meters makes for long term durability with virtually no degradation of accuracy

  • An electrical transmitter Unit attachable

A microswitch or a reed switch type transmitter unit having simple construction and high reliability is available.

 

Specification Tokico Flow Meter 1.5 Inch :

Model : FRO Type

Bore : 40 mm

Model No. Direct-reading integrating type : FRO0438-02X

Accuracy : ±0.5%

Max. Working pressure : 10kgf/cm²

Hydraulic test pressure : 20kgf/cm²

Max. working temperature :

50°C for kerosene and light oil (100°C with the FGB type)

100°C for heavy oil (120°C with the FGB-00X and FGB-02X types)

Flange rating : JIS 10kgf/cm²FF

Material Body : Cast iron (FC25)

Material rotor : FRO Type : Aluminium Alloy Casting

Counter Unit : Integrating pointer and integrating counter ( a reset counter is also available)

Electrical Transmitter Unit

Transmitter : FRO Type : Microswitch (M)

Power Supply : AC100V 50/60 Hz as standard

Number of Pulse : 0~5 PPS

Output signal : ON-OFF contact

Transmission cable : 2-wire cable with cab type

Kerosene, Light Oil : 800~6,000 (Viscosity Intermittent), 800~4,500 (Viscosity continuous)

A heavy Oil : 100~7,000 (Viscosity Intermittent), 100~6,000 (Viscosity continuous)

 

Tokico Flow Meter 1.5 Inch

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.