Water Hammer Tozen 1 Inch MH-25 can use for :
- Prevention of water hammer caused by ON/OFF operation of lifting pump
- Prevention of water hammer caused by sudden opening and closing of a ball tap or selenoid valve, etc
Feature Of Water Hammer Tozen 1 Inch
- Water Hammer Absorption
It can be directly connected the piping that is different from the accumulator type. It has excellent water hammer absorption effect without inhibiting the fluid flow. - Easy Installation
It can be installed easily and freely even in a narrowspace. Please choose a direction for installation according to the site situation.
Operating Conditions
Maximum allowable working pressure : 1.6MPa (16.3 kgf/cm) and below
Maximum operating temperature : 60[) and below
- Before using, check that the maximum working pressure and temperature are within the working range
Perforated Pipe : Small holes are drilled in the pipe regularly placed in series with the flow, and connected with the inner side of the elastic tube
Elastic Tube : The tube outside of the perforated pipe uses the rubber with excellent elasticity and airtightness, and the both ends are fixed with flanges
Air Chamber : There is an air chamber between the tube and the casing. The 0.5MPa air is filled in advance in the air chamber.
Performance
When the pressure wave that generates water hammer passes throught the Mooha, its pressure is transmitted to the tube through the pipe. The tube that keeps balance in the normal pressure is instantly swollen due to its elasticity and serves to absorb the water hammer.
Dimensions
- Model : MH-25
- Nominal Diameter : 25 mm
- Dimension (D) : 127 mm
Dimension (L) : 156 mm - Capacity Of Air Chamber : 1
- Mass : 7 Kg
