Controller EMEC LDS/LDS PLUS Series, Wheel with ” EASY-NAV” control, flow control, local & Remote Control, ERMES web communication, permanent data storage with system log PT100 temperature probe, stand-by input, Alarms: damaged probes – max dosage – threshold – levels – flow, programmable delay at dosing start-up ( up to 60 minutes ), Priority dosage, Automatic temperature compensation, Probe readout menu (LDSCDIND), working modes on/off impulsive proportional, proportional PWM and Fixed PWM, Automatic or manual dosing activity, mA output (option).
Options for LDS and LDS PLUS:
- USB for data log recording
- Current Output (0/4 – 20 mA)
- Ethernet
- 2G/3G modem
- MODBUS protocol
- WIFI module
PLUS Features:
- 5 relais ( 2 setpoint; alarm; probe cleaning; circulation )
- Probe Cleaning
- PID
- Feed Forward
LDSPH – LDSPH PLUS pH (0-14) – C (0-200)
LDSRH – LDSRH PLUS ORP (0-100mV) – C (0-200)
LDSCL – LDSCL PLUS Chlorine (0-10 mg/I CI) – C (0-200)
LDSCD – LDSCD PLUS Conductivity (depending on the probe) – C (0-200)
LDSCDIND – LDSCDIND PLUS Inductive conductivity (0-3 mS|0-30mS|0-300mS) – C (0-99,9)
LDSETORB2 – LDSETORB2 PLUS Turbidity (0-4000 NTU) – C (0-40)
LDSTRC – LDSTRC PLUS Markers (0-9999 PPM) – C (0-200)
LDSFR – LDSFR PLUS Fluorine (1E-5-1M) – Concentration (0-300 ppm) – C (0-60)
Factory parameter configuration
- pH
- ORP
- Chlorine/Bromine
- Conductivity
- Inductive Conductivity
- Chlorine Dioxide
- Hydrogen peroxyde
- Ozone
- Peracetic acid
- Turbidity
- Dissolved Oxygen
