Controller EMEC MTOWER Series, Easy control by ENCODER wheel with “EASY-NAV” rotation, Current Feed&Bleed display, local & Remote Controlled, ERMES web communication, Simultaneous multiple view for probes reading, Permanent data storage with system log, Stand-by input, mA output (option). Working modes: on/off, impulsive proportional, proportional PWM and fixed PWM. Pre-bleed: Reduced water system conductivity before biocide dosing. Blow down: Discharge control on conductivity values, lockout: Discharge valve locked for a settable time (after biocide dosage).
Timeout: Maximum discharge valve opening time, Programmable delay at dosing start-up (up to 99 minutes), PT100 temperature compensation. Alarms: conductivity (high/low), Bleed timeout (conductivity not reached after set time), product level, flow, meter activity, not restored water.
- Conductivity inductive probe
- USB for data log recording.
- Current Output (0/4 -20 mA)
- 2G/3G modem
- WIFI module
- MODBUS protocol
3 CHANNELS MODELS
MTOWER PLUS CD/PH/CL : Controller for conductivity, pH and chlorine.
MTOWER PLUS CD/PH/RH : Controller for conductivity, pH, ORP
2 CHANNELS MODELS
MTOWER CD/PH : Controller for conductivity and pH
MTOWER CD/RH : Controller for conductivity and ORP
MTOWER CD/CL : Controller for conductivity and chlorine.
1 CHANNEL MODEL
MTOWER CD : Controller for conductivity.
- Conductivity for blowdown
- 2 Timers for biocides.
Factory Parameter Configuration
- Conductivity or Inductive conductivity