Pressure Gauge Model 610.20 and 630.20


DESCRIPTION

As class 0.6 test gauge series, the model 610.20 and 630.20 capsule pressure gauges are suitable for precision measurements in laboratories. They are based upon the proven capsule measuring system. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated.

The modular design enables a multitude of combinations of case materials, process connections, nominal sizes and scale ranges. Due to this high varience, the instrument is suitable for use in a wide range of applications within industry.

For mounting in control panels, the capsule pressure gages can, depending on the process connection, be fitted with a surface mounting flange or with a triangular bezel and mounting bracket.

APPLICATIONS

  • Precision measurement in laboratories
  • High-accuracy pressure measurement
  • For gaseous, dry and on-aggressive media
  • Model 630.20 also for aggressive media

SPECIAL FEATURES

  • Zero point setting in front
  • Special connection location on request
  • Low scale ranges from 0…10 mbar

STANDARD VERSION

Design

EN 837-3

Nominal size in mm

160

Accuracy class

0.6

Scale ranges

0 … 10 mbar to 0 … 600 mbar

or all other equivalent vacuum or combined pressure and vacuum ranges

Pressure limitation

Steady: Full scale value

Fluctuating: 0.9 x full scale value

Permissible temperature

Ambient: -20 … +60 °C

Medium: ≤ 60 °C
Temperature effect

When the temperature of the measuring system deviates from the reference

temperature (+20 °C): max. ±0.6 %/10 K of full scale value

Ingress protection per IEC/EN 60529

IP54

Process connection

Model 610.20: Copper alloy

Model 630.20: Stainless steel

Lower mount or lower back mount

G ½ B (male), SW 22

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.