Technical Features:
A Tough Workman’s nachine built for Heavy Duty Commercial Use
tHE cief-700 is patented and unique in terms of Care, Service and Maintenance:
- Minimal Service Tools are required ( 1 x Wrench, 1 x Screwdriver ) to dis-assemble anf reassemble the entire machines-all pants.
- It is Field Strippable-pretty much BY HAND-of major components including All Electrical Replacement requirements. The CIEF-700 can be dis-assembled and re-assembled by HAND.
– Motor/ Filter / Anti- Torque Block Replacement – no tools required.
– Noozle Replacement / Cleaning / Service – no tools required.
– Formulation Tank Replacement / Cleaning – no tools required.
The CHIEF-700 is constructed with nugged chemically Resistant High Grade Virgin HD Polyethylene.
The CHIEF-700 has:
- a Powerful 700 Watt samsung Motor
- an anti-torque effect elimination assembly-with a purpose designed ” anti-torque’ block and bracket preventing motor spin and twisted wiring.
- an internal heat shield-dramatically reducing Air Friction Heat to Motor/Nozzle Housing.
- All metal Liquid/ Air Delivery Components – except for 2 External flexible nylon liquid/Air Delivery Tubes.
- All fittings are BRASS-no plastic bolts/nuts stainless steel fittings are optional.
The CHIEF-700 features THREADED SCREW CAPS-
Closures ARE NOT secured with metal to plastic screws.
Technical Specification:
| Motor/Blower Samsung | VAC/Hz AMPS WATTS RPM |
230-240 Volt/50/60 Hz 5.6 700 wATTS 37,000+/- 1500 |
| AIR VOLUME – OUTPUT | 2910 lts/minute | |
| VACUUM | 24.0 kPa | |
| FORMULATION TANK | Capacity in Litres with Graduated markings | 4lt STD. (5lt, 6lt with 9lt Optional ) |
| FLOW RATE VALVE | Adjustable / Variable Output Maximum Flow Rate | Needle Valve, Brass, SSTL ( Optional ) |
| Maximum Flow Rate | 60 lts/Hr | |
| SET FLOW RATE VALVES | FSFR Valves, Brass, SSTL Optional | Set of 5: #20 = 5 lts/Hr, #28 = 10 lts/Hr, #37 = 16 lts/Hr, #42 = 21 lts/Hr, #47 = 26 lts/Hr |
| DROPLET RANGE | Visible * metres | 15-20 metres |
- Droplets travel further than what are visible, Actual droplet travel depends of many environmental factors – wind/breeze velocity ambient temperatures, solution viscosity, droplet sizing & density, etc
| PARTICLE SIZE DIAMETER | Measured in microns ( µm ) | 5-50 µm |
Droplet size is determined by formulation ( Solution ) Flow rate adjustments, High Flow Rate = larger droplets. Low Flow rate = smaller droplets. The viscosity of the formulation ( Solution ) also effects droplet sizing.
| NOZZLE | Vertical in that the spray swirls on exit | NOVA-MISTTM Vortical Adjustable Nozzle |
| DIFFUSER – Material | HDPE | |
| Face Plate Replaceable | yes | |
| Air Bleed | Yes | |
| Material-Construction | Motor Housing/Nozzle | HDPE |
| Formulation Tank | HDPE | |
| Protective Tank ” Boot” | Rubber | |
| Fittings | BRASS, SSTL – Optional | |
| External Delivery Lines | Nylon | |
| Internal Delivery Line – Housing & Tank | BRASS, SSTL – Optional | |
| “O” Ring Material/ in-Tank Filter | VITON | |
| Multi-Purpose Use | Application Of insecticides, Fungicides, Foliar, Fertilizers, Disinfectants, Sanitizers | |
| Tank Opening Ports | YES-Each comply with W.H.O. Guidelines | >90mm diameter |
| Formulation Filter | In-Tank Push on Filter | SSTL Mesh with VITON Support |
| Warranty | Conditional | 24 Months |
| Shipping Dims | 36.0cm x 36.0cm x 52.0 cm | |
| Volume ( Packed ) | Cubic Metres | 0.07m3 |
| Weight ( kgs ) | 5.5 kgs | |
| ADDITIONAL FEATURES | ||
| Screw Cap Assembly | No screws-plastic to plastic. Motor is secured in Housing with a screw Cap, Nozzle is secured by a Screw Cap, Formulation Tank + Housing secured with a Screw Cap, Formulation Tank + Housing secured with a Screw Cap | |
| Internal Sound Dampner | Noise Suppressor Capacitor | |
| Heat Sink – Heat Shied | Within Motor Housing | |
| Thermal Cut Out | For Motor Protection | |
| Torque Control | Motor Torque Control to counter the motor wanting to spin inside of the housing – Completely elimination electric wiring twist | |
| 2 Part Wiring | To allow easy removal of motor from the attached wiring for maintenance purposes. |
